EV charging connectors explained: Type 1, Type 2, CCS and CHAdeMO
The safest way to choose a public charger is to match the connector on the station with the socket on your car. Connector names can look confusing, but the decision becomes simple when you separate AC charging from DC rapid charging.
5 min read · Updated for practical EV planning
Type 1 and Type 2 AC connectors
Type 1 is a single-phase AC connector found on some older vehicles and in some markets. Type 2 is the more common AC standard across Europe and many newer EVs. Some Type 2 stations have a tethered cable; others require you to bring a Type 2 cable.
Check whether the station has a tethered cable or a socket.
AC power depends on both the charger and the car's onboard AC charger.
A larger kW number does not help if the vehicle cannot accept it on AC.
CCS for DC rapid charging
CCS adds two high-power DC pins below the AC section. CCS1 is used mainly in North America, while CCS2 is common across Europe and many other markets. The connector must match the vehicle inlet; an ordinary AC cable cannot replace a CCS cable for a rapid session.
CHAdeMO and other connector types
CHAdeMO is a separate DC rapid-charging standard still used by some vehicles. Older or region-specific vehicles may also use other connector formats. If you are unsure, check the vehicle handbook or the charge-port label rather than relying on a photo of a similar model.
What to check on a station listing
A useful station listing should show the connector type, charging power, and whether drivers recently reported a problem. Confirm those details before travelling, especially when the station is far away or you have limited battery remaining.